Graham Bennett

A large oval plastic base with a wide strip of white card running at an angle over the screen-left side. On the far left, towards the back, is a single lamppost overhanging the card

Decided an Imperial garden would have huge concrete slabs for a footpath, so spent #HobbyStreak day 414 shaping and texturing some thick plasticard (not that the texture shows up... fingers crossed for painting!)
Also, I finally found a use for an intact lamppost!

Huh... Yeah I think you've called it right, I hadn't clocked that at all

A Knight Tyrant's legs on a large oval base. In the foreground, biased to the screen-right side, there is a figure with upraised hands stood between palm-like trees

Started to plan out the Tyrant's basing for #HobbyStreak day 413; I really want to get this sense of it emerging from / moving through a park or botanical garden (or whatever the Imperial equivalent would be). I'll probably add a footpath on the left side to justify the lack of trees there

Dietary restrictions really do shine a light on how little food companies care about public health. It gets even worse because they will randomly change the recipe or even have manufacturing variations so you're constantly reading labels.
It sucks.
Hope you find some stuff you can trust.

I do miss the outright goofiness of that era haha

Nuffle blesses those that are up for a laugh

Weirdly AoS is less model intensive then Fantasy was, but I think Skaven are about on par with Tyranids for potential via Plague Monks

Reminds me of the old Skaven lists for Fantasy:

"I deploy my ten wide, ten ranks deep unit of Skaven slaves"
"A hundred strong?! How many points is it?"
"Fifty."

The torso of a Knight Tyrant with a semi-circular couch where the cockpit should be. A mutated figure reclines in the couch with various dishes of food and drink on the sides. On the screen-left shoulder of the Knight is a multiple-missile launcher cupped in a large pair of hands, and on the right a large skeletal snake with cannons extending from the mouth

Close up rear view of the same Knight Tyrant's torso showing a pipe mouthpiece resting on the arm of the couch connected to a long tube the leads into a hole in the back of the carapace

Worked on adding all the details to the torso for #HobbyStreak day 412! Of course my stupid missile turret caused a problem again! Fortunately I realised before attaching the pauldron, but it blocks where the hookah would normally go. So I greenstuffed out a longer tube to connect back into the rear

As someone living with a person that had to deal with this, estrogen supplements seemed to make the world of difference.
What ever you do, I hope you find a way through it

Right?! I was certain we'd get something with those new Terminators

A set of Knight Tyrant legs, laying on their side, complete with armour plates featuring tentacle-like markings, strange runes, and daemonic faces

Spent #HobbyStreak day 411 sanding down all that greenstuff from the last week or so and then, in what can only be described as a call for help, I decided to remove all the rivets from every armour plate.
At least it's all mounted now! At least on the legs, still a bunch of work to do on the torso

Fifty days in, well done!

Wishing you all a very merry summary judgment

Ok, revisited the upper-arm armour and ended up somewhere totally different, but i didn't ruin it this time! Also spent waaaaay too long practicing sculpting small bits on the thigh armour, but I think that's all the armour done
#HobbyStreak day 410

Hah fair

Damn, I do like that take

You get Perception, but we keep Wisdom and replace Intelligence with Knowledge
There's a difference between, "can I figure this out" and "I know how to do this" that always felt like the point of Wis vs Int to me, but I think the term "Intelligence" is overloaded

Two upper-arm armour plates from a Knight Tyrant. The right plate has a hook-like device sculpted in green putty while the left is unadorned.

BEHOLD, the fruits of my labour!
Sigh.
Started on the upper-arm armour for #HobbyStreak day 409. Got the screen-right one blocked in and then got stuck in on the other... and then completely ruined it just as I thought I was getting it somewhere. So, scraped it clean and will try again tomorrow.

Congrats on the big THOUSAND!!! That's a huge achievement

Both shin guards from a Knight Tyrant with green putty swirls and tentacle-like designs. The right shin guard has a face with green putty modelled as if the face is pushing out of or through the armour

Back on the squiggles for #HobbyStreak day 408 and (probably) finishing the shin armour

Flawless bit, 10/10

Close up of a Knight Tyrant's legs, showing the crotch, featuring a daemonic head, and left leg armour, featuring a statue-like man's face

Giving the spirals a rest as I was inspired by some of the random bits now littering my desk from this project... Smile!
#HobbyStreak day 407

Yes.

Absolutely!!

An armoured elf winding up a big overhead swing with a large two-handed sword

I'm obsessed with this pose! Funny little tactical rock aside, I think it's incredible how much energy is in this mini

Close up of a Knight Tyrant's left shin armour showing swirls of green putty

Moved onto the leg armour for #HobbyStreak day 406 - I think I'd have made more progress but I became fixated on getting that curl on the top lip

The Cthonian heads are pretty heavily cybernetic too; painting the skin to look synthetic maybe?

I think that's the other shoulder finished now too! Kind of relaxing just pushing greenstuff around and seeing what I can do with it, the circular bit was a real challenge, but still fun
#HobbyStreak day 405

More swirly spiky bits for #HobbyStreak day 404, including starting on the other shoulder. Really slow going because apparently I'm in a dropping-things state today