PCBWay

Hackerbox 0123 - Matrix (+Giveaway) YouTube video by Jamie's Hack Shack

New video: @hackerboxes.bsky.social 0123 "Matrix" is up! HUB75 64x32 RGB LED matrix+Raspberry Pi Pico 2. Complex under the hood, but easy when you're standing on the shoulders of giants.(@adafruit.com Protomatter) Thanks to @pcbwayofficial.bsky.social for sponsoring this one
youtu.be/ylR5WNxnWPU

BEAPER Pico v1.00 – Beginner Electronics and Programming Educational Robot for Raspberry Pi Pico and Pico 2 - Share Project - PCBWay Meet BEAPER PicoBEAPER stands for Beginner Electronics and Programming Educational Robot, and Pico refers to it being designed for the Raspberry Pi Pico family of microcontrollers. BEAPER Pico follows...

It's freebie Friday!!

(Almost) free @raspberrypi.com Pico robots! 🤖

I've made it easy for #STEMEducation teachers, #robotics clubs, or really anyone 😃 to buy BEAPER Pico PCBs directly from @pcbwayofficial.bsky.social here: www.pcbway.com/project/shar...

Go. Help the robots take over. 🤣

My own cable designed PCBs
All from @pcbwayofficial.bsky.social

Hackerbox 0122 - Ouroboros (+Giveaway) YouTube video by Jamie's Hack Shack

New @hackerboxes.bsky.social video: ESP32 camera + ECG monitor build. Spent way too long troubleshooting esp32 wifi junk! The ECG build was super neat.
Thanks to @pcbwayofficial.bsky.social for sponsoring this one!
www.youtube.com/watch?v=A11Z...

ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO - Share Project - PCBWay Meet ARPS-2ARPS-2 is version two of my Arduino-compatible Robot Project Shield for Arduino UNO. ARPS-2 is a refinement of the original ARPS circuit and adds two additional Servo or I/O headers while r...

It's freebie Friday!!

Free* #robots for #education! 🤖

* Ok, almost free. 😊

I've shared my beginner #Arduino #robot #PCB on @pcbwayofficial.bsky.social enabling schools to order APRS-2 circuits at the lowest possible cost. Find it here: www.pcbway.com/project/shar...

#STEMEducation

Hackerbox 0121 - MCU Lab 2025 ( +Giveaway) YouTube video by Jamie's Hack Shack

New video is up.

HackerBox 0121 from @hackerboxes.bsky.social is a microcontroller lab kit that really leans into learning by doing. No pressure to be an expert, just room to experiment and build confidence.

Thanks to @pcbwayofficial.bsky.social for sponsoring.

youtu.be/XEJ-Hc8Tk5k

📣【Holiday Notice】Please arrange your order in advance.

UBMP4 PCBs are also available from @pcbwayofficial.bsky.social here: www.pcbway.com/project/shar...

💳New guide is live

✨https://www.pcbway.com/blog/help_center/How_to_Use_Payoneer_to_Pay_for_Orders_a72bb66b.html

Learn how to use Payoneer to pay for your orders—simple, fast, and hassle-free.
Check it out and streamline your payments today.

🔋World’s smallest 1S battery charger
USB-C input, ultra-compact design, perfect for space-limited projects.
Red = charging | Green = done.
-More info: www.pcbway.com/project/shar...

🛠️Can a PCB be an enclosure? @meticulous-tech.bsky.social @crowdsupply.bsky.social
The USB VSense uses a unique "Oreo" stacked design.

-More info: www.crowdsupply.com/meticulous-t...

Gas to electric ❄️⚡
$20 snow blower, new drivetrain, battery-powered.

Made with PCBWay high-quality 3D & CNC services
Make your design a reality.
🎥 @rclifeon

🥕🐱 Electronic carrot tissue cat!
The cat doesn’t get the logic…
But it does get the reward 😼

At the end of technology, there’s always motivation.
#TechFun #MakerLife #PCBWay #Shorts

🎥Video from: @超级无敌大开门 and @ 嘎威刘 (Xiaohongshu)

Got a Christmas present to split with Lily sent by @queenelaine.bsky.social from @pcbwayofficial.bsky.social 🖤

A big thank you goes out to them! I'll try to keep the plushie safe from being ripped apart 😂

Rev 1.0 of my custom tail light for Kawasaki ZR-7 has arrived and is ready for testing.

A huge thanks to @pcbwayofficial.bsky.social for sponsoring this project~
PCBWay also offers CNC and 3D printing services. Be sure to check them out at www.pcbway.com

#taillights #pcb #attiny85 #attiny #zr7

Photo of two USBSID-Pico v1.3 pcb's, one without parts and one with SMD parts pre-soldered.

👀 Look at what arrived just before Christmas! 🎄 10 new smd pre-soldered USBSID-Pico v1.3 pcb's to stock up my Tindie store! Many thanks to @pcbwayofficial.bsky.social for the great quality, fast shipping and for sponsoring my project! 🙌🏻
#retro #chiptunes #commodore #usbsidpico

Thank you PCBWay @pcbwayofficial.bsky.social for the Christmas gift box! We love the bone china cups especially!

Used @pcbwayofficial.bsky.social to print some gears for my PC Engine CD-ROM2. The prints seemed fine and after installation I powered it up and the sled did move fine. Unfortunately, it seems like I have a dead laser.
#retrogaming #pcengine

Thanks to @pcbwayofficial.bsky.social for the holiday swag 💚

Presents from PCBWay In early December, Emily from PCBWay sent me a short message saying they were preparing some small gifts in time for Christmas and asking if I was interested in receiving them?

My latest blog post: Presents from PCBWay

mikecoats.com/pcbway-prese...

In early December, Emily from @pcbwayofficial.bsky.social sent me a short message saying they were preparing some small gifts in time for Christmas and asking if I was interested in receiving them?

#sponsored

Some pictures of the assembly.
Originally, the LM2596 was not part of the design, but for this prototype I decided to add it.

PCB manufactured and assembled by @pcbwayofficial.bsky.social

#taillights #electronics #pcb #diy #tinker #hack #attiny85 #attiny #kawasakizr7 #kawasaki #zr7 #zr750

OGX-Mini: Create Your Own Controller Adapter with a Raspberry Pi Pico!

A huge thank you to @queenelaine.bsky.social from @pcbwayofficial.bsky.social for sponsoring this video 🖤

Watch Here: youtu.be/wtoVRiHMFfs

I Tried Running DOS Games on a Classic Mac… It Was a Disaster! #doscember YouTube video by Rich's Random Retro Reviews

I made another video for #DOScember - How well do you think DOS games run on a Mac via Virtual PC? youtu.be/GjvMNh1PFPs

Thanks as always to
@pcbwayofficial.bsky.social for their continued support.

Restored And Upgraded 32 Years Later YouTube video by Macho Nacho Productions

Latest video is LIVE on restoring and upgrading my family’s old 486 computer!

Should I build a Windows 95 machine next using the extra parts from this project?

Huge thanks to @PCBWay for sponsoring this video

Restored And Upgraded 32 Years Later
youtu.be/Xu3In9C1GiM

Permanent breadboard

These permanent breadboards from pcbway came out amazing! It might not look like it, but just like a regular breadboard the power rails and columns are connected - much more convenient than perfboard

2025 PCBWay Christmas & New Year Big Sales Free Prototype for Christmas Design

🎉 PCBWay Christmas Big Sales 2025 is here!
👉 www.pcbway.com/activity/chr...

Enjoy exclusive holiday offers:
Free Purple, Matte Black & Pink solder mask
10% OFF Transparent & Somos Ledo 3D materials
Grab up to $435 in coupons

Order now and make your projects shine this Christmas!

Picture of an USBSID-Pico PCB seated with a RaspberryPi Pico2, a MOS6581 and a MOS8580.

New boards are ordered and will be available at my Tindie store in a couple of weeks: www.tindie.com/products/lou...
Many thanks to my new sponsor @pcbwayofficial.bsky.social for providing the best service for makers.
#retro #usbsid-pico #chiptunes #commodore64

Stop Overloading Your USB Hub with VSense YouTube video by Meticulous Technologies

How not to overload your USB Hub with VSense

@crowdsupply.bsky.social @pcbwayofficial.bsky.social @baldengineer.com @hacksterio.bsky.social @hackaday-feed.bsky.social @cnx-software.com

youtu.be/ltXmaBX8poo

Subcribe to our campaign: www.crowdsupply.com/meticulous-t...

🦇✨Straight out of Gotham.
This custom-made Batarang was crafted by Kaemen Lafleur — and it looks incredible.
#Batarang #BatmanFans #DIYProps #MakerArt